Daikin ductless-mini-split — Daikin indoor units covered by the SM-TS3 malfunction chart, including room air, SkyAir, and VRV indoor equipment Error Codes Directory

Daikin A6: indoor fan motor locked, overloaded, or badly connected

Daikin lists A6 in the indoor unit division as a fan motor malfunction, described as the motor being locked, overloaded, or suffering from a faulty connection. All three are ways of saying the board commanded a fan speed and did not get the feedback it expected, so the code is about the command-and-feedback loop rather than about a burnt-out motor. Applies to: Daikin indoor units covered by the SM-TS3 malfunction chart, including room air, SkyAir, and VRV indoor equipment The definition here comes from the Daikin malfunction code chart, which is organised by division and detail code rather than by model. Indoor fan arrangements differ sharply between a wall unit, a cassette, and a ducted unit, so the mechanical cause behind the same code is model-specific and is read from that unit's service manual. Owner-safe checks: Switch the affected indoor unit off and leave it off, since running the outdoor unit against a stalled indoor coil is what the protection prevents. | Confirm the filters, front panel, and any decoration panel are correctly seated and latched after recent cleaning. | Write down any noise heard before the fault, the fan speed it occurred at, and roughly when it started. Qualified technician: Reaching into the fan housing, freeing a wheel, and testing motor feedback or winding condition require the indoor casing to be opened by a qualified technician. | Do not attempt to turn the fan wheel by hand through a grille or outlet. The blade edges and the drive arrangement are not designed for that access.